SpliceCom Maximiser

Type:

Proprietary / LDAP

Requirements:

System username and password
Partner Code

Firewall Requirements:

TCP: 389 (LDAP)
TCP: 4000

Architecture:

This PBX will be replaced by the SelectVoice (SV) and will be end of life March 2020.

The SpliceCom Maximiser connects onto the LAN via the RJ45 socket on the front of the PBX. The local IP address and other network settings are set through the HTML-based programming interface.

Driver Requirements:

None

Firmware Requirements (for new installations):

SV1.2.57 last tested